Shanghai LERDN Lightning Protection Co., Ltd.
Products
Contact Us
  • Contact Person : Ms. Xia Athena
  • Company Name : Shanghai LERDN Lightning Protection Co., Ltd.
  • Tel : 86-21-3632 1681
  • Fax : 86-21-51062207
  • Address : Shanghai,Shanghai,2/F., 305 Jiangchang No.3 RD., Shanghai Shibei Industrial Park, China, 200436
  • Country/Region : China
  • Zip : 200436

LDY-CZ Lightning Arrester Socket

LDY-CZ Lightning Arrester Socket
Product Detailed
Related Categories:Electrical Plugs & Sockets
1. LDY-CZ Lightning Arrester Socket 2. Type: LDY-CZ/PDU 3. Un: 220V, Uc: 320V, Up: <1.5kV 4. Ie: 10A, In: 5kA, Imax: 10kA

LDY-CZ Lightning Arrester Socket

Application range

LDY-CZ series socket power surge protective devices are applied to the front side of various terminal equipment of AC not more than 220V and rated current less than 10A, providing protection against overvoltage arising from surge to the power supply line and misoperation.(option from standard IEC61643-1 and GB50343)

Main features

High current capacity, low residual voltage

Modularized design, standard socket design, convenient for installation and use

Introducing multilayer protection technology, strong protection ability, high reliability

Build-in temperature fuse, safe and reliable

Red pilot lamp on indicate normal, off indicate invalid

Main technical data

Type

LDY-CZ/PDU

LDY-CZ/06

Nominal operating voltage Un V

220

220

Max. continuous voltage Uc V

320

320

Voltage protection level Up V

< 1.3

< 1.5

Part No.

086201

086202

Rated working current le A

10

Nominal discharge current In (8/20μs) kA

5

Max. discharge current Imax (8/20μs) kA

10

Connection mode

Standard GB three-position socket

Response time tA

< 25ns

House material

Enhanced flame retardant nylon

(light gray, flame retardancy degree: V0)

Method of installation

19” Rack Type Installation

35mm standard DIN rail installation

Cross-section

≥ 2.5 mm2 stranded/flexible conductor

Installation instruction

The protector connected in parallel between the power channel and the protected device.Connect the input terminal to the power wire or insert the input terminal into the power socket, and then insert the power wire of protected device into socket, make sure the reliable connection.connect the earthing wire of the protector to the equalizing ring of the lightning protection system.if the red indicator light on after circuit be electrified. The lightning protection work is normal.

LDY-CZ Lightning Arrester Socket



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.